The H2O Difference
15 Stage Water Purification Program
Our Pro Series System utilizes a 15-stage Water Purification Program consisting of high-capacity water softening, activated carbon adsorption and sediment filtration. This together with Reverse Osmosis, solid Carbon block polishing, one micro absolute filtration, ultra-violet light sterilization and a PATENTED process that enhances the flavor and texture of water. The result, refreshing crystal clear drinking water free of chlorine, organic chemicals, dissolved solids, heavy metals and harmful bacteria. Here's how it works:
Activated Carbon Adsorption – A high-grade, commercial quality, activated Carbon filter that removes or substantially reduces chlorine, volatile halogens, pesticides, herbicides and industrial solvents such as: THMs, TCEs, Benzene, EDB, Trichloroethane, DBCP, Dichloropropane, and Dichloroethylene.
ION Exchange Water Softening – Removes the hardest materials, like Calcium and Magnesium which yields a more refined and finished water.
20 Micron Particle Filtration – The 20 Micron removes particles of iron, dust, organic debris, mold, pollen, salt and other sediments down to 8x smaller than the visible range of the human eye.
5 Micron Particulate Filtration – The 5 Micron filter removes fine particles of iron, dust, organic debris, mold, pollen, sand, salt and other sediments down to 40x smaller than the visible range of the human eye.
200 PSI Booster Pump - The multi-stage booster pump increases the water pressure to appropriate levels which allow pure water to percolate through the Reverse Osmosis Membrane.
Reverse Osmosis Membrane (TFC Type) - A semi-permeable membrane by which water is forced through that separates the dissolved materials from the "permeate" or purified water. The Reverse Osmosis membrane typically removes over 98% of all dissolved minerals and metals from water.
Microprocessor Control System - Our Microprocessor Control System utilizes a computer control module that is constantly monitoring the water produced to ensure H20's quality and standards are met. If at any point the data values received fall "out of spec" an alarm is triggered, and the system will automatically shut down
Our Patented Flavor and Texture Enhancing Process - After purification, water can taste flat or lifeless. We pass our water through a patented device that restores the natural energy and validity of the water. This process provides a dramatic improvement in both flavor and texture which makes our water vastly different from other "run of the mill" purified waters.
Protected Storage - Once our pure water has been produced, it is stored in Food Grade, FDA Approved water tanks. These tanks are vented through a 1 Micron absolute filter. This protects the water from harmful entities that could otherwise enter the tanks and contaminate the water.
Re-Pressurization Pump - Our state-of-the-art pumping system uses a water-cooled stainless-steel pump to prevent contamination of purified water.
Solid Block Carbon Filter (5 Micron) - The Solid Block Carbon Filter provides a second line of filtration to remove the last possible trace of organic chemicals and polishes the flavor, prior to dispensing.
Absolute Filtration (1 Micron) - The 1 Micron filter, an extremely fine sediment filter, removes the smallest of possible minute particles left in the water.
Ultraviolet Protection - The final step in our purification process is the Ultraviolet (UV) lamp sanitizer. The UV light is used to eliminate bacteria, viruses, cysts and/or pathogens. Water passes through the UV just before reaching the bottle, ensuring you are getting the most refined, highest of quality and finished product.
In Place "Clean" System - Our "Clean" system is used to periodically circulate cleaning/sterilizing solution through all lines on the system. This process assures us and you, our consumer, that there are no bacteria or contaminants within the system.
You can rest assured that the water you purchase is of the absolute highest and best quality!
